Game Plan Pinball

Contact Us
Manuals & Schematics

Also Check Out
© 2014

Welcome to

Welcome, Guest. Please login or register.
May 07, 2021, 06:30:03 PM
Home Help Search Login Register

Pages: 1 ... 8 9 [10]

 on: February 24, 2012, 09:19:04 PM 
Started by beanerkc - Last post by beanerkc
I am still working on my Agents 777 restoration. My third flipper won't fire due to the switch is missing the long piece of metal. Does anyone know of a compatible switch, there is only a few dozen of them on Marco's website and I am confused on which could work.

Is the the right type of switch?

Also I figured out why my drop targets don't work, the piece of metal (plunger?) that should be in the solenoid connecting to the drop target mechanism is missing  shocked. Any ideas on the parts for this?

Also I think I have a dead solenoid on one of my round bumpers in the middle of the playfield, power is getting to the solenoid but it does not fire. Any idea on the part to replace this?

Thanks so much for the help, this forum is great!

 on: February 19, 2012, 07:42:36 PM 
Started by Pinball Shark - Last post by lamule14
I am an electronic technician and when I was studying  for this work, in the classroom, we had a Super Nova pinball machine in non-working condition, they have give it to me on my second year of this course.
I will put pics on my website as soon as possible (probably this evening or this night)
Thank you to take a look to anybody wants to look.

Website: (in French, for the moment)

and my general forum at:

Edit: Added c at the end of "electroni".

 on: February 15, 2012, 10:41:01 PM 
Started by v8torino - Last post by v8torino
Bump,Parts needed,have sent a couple PM's with no reply back to me.
Kirk in Colorado,email me at       v8torino   at    yahoo    dot    com
Phone # 3039403606     6 to 9 PM Mountain Standard Time

 on: February 12, 2012, 11:33:32 PM 
Started by Ricjas - Last post by Ricjas
Working on Attila the Hun and I get a constant blink on the MPU. Power supply has new bridges and all test points are correct.

MPU test points are:
J1 pin 3 - Connected - 15.5 V
               Unconnected 27 V
TP1 -    -7.27 v
TP2 -  -9 mv

I didn't even take any more readings as something is obviously out of whack.

What on the MPU will drag down the voltages like that?


 on: February 03, 2012, 11:14:58 AM 
Started by Slinger - Last post by BriMc
Hi All,

I don't know if I would want to go any stronger of a flipper than the original GP coil, they are pretty beefy. The majority of machines I buy whether it be for my collection or for a parts machine have the snookers beat out of a lot of the playfield components, from the post in front of the center targets being bent, the center target being broken, to shattered plastics.


 on: February 02, 2012, 12:24:20 PM 
Started by Slinger - Last post by Slinger
Checking back in and realized I never thanked you for the info Shark. I was able to tone down the non-standard flipper by adjusting the EOS and it's been working pretty well since. Will replace both coils with proper version at some point. Thanks!

 on: February 01, 2012, 08:32:31 AM 
Started by Pinball Shark - Last post by Pablo~
i`m from Argentina, recently buy a Super Nova wich no work.
Was an insane business, i`m buyed from far away only with celular photos, but only pay for it 300.

The lucky:  the battery was removed time ago.

So, i think i`m capable of repair... and do a fully restoration/reconstruction of the cabinet, the wood fall in chips mostly.

(sorry my english)

 on: January 30, 2012, 08:58:03 PM 
Started by BriMc - Last post by v8torino
Thanks Brian,
I received the PM and emailed you back with my phone #,dial me up if you can any evening 6 to 10 PM,
Mountain Standard Time
                        Kirk in Colorado

 on: January 30, 2012, 11:17:01 AM 
Started by BriMc - Last post by BriMc
PM sent

 on: January 28, 2012, 06:59:45 AM 
Started by hobbypin - Last post by Genesis Creative
That's encouraging. I'll take a closer look at my connectors and hope for an easy fix too.

Pages: 1 ... 8 9 [10]

Login with username, password and session length

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!